Big mounting plate with added ball bearing for the motor serial „Orbit"

The mounting plate includes a ball bearing on the shaft end of the motor. So the motor works with four ball bearings included. The motor can handle more power and harder flights. You can rebuild all motors of the serial „Orbit" and „Orbit Hei Expert" with this bigger mounting plate with the ball bearing or order a new motor comlete with the new plate.

Motor-stretch for the Orbit

To fix the motor in slenderizing hulls, we developed a motor-stretch for the Orbit. To use the greater diameter of the hulls in the behind, the motor is dislocated for 25 mm after back.

Activ-cooling for the Orbit

For effectiv cooling the motors of the series Orbit, we developed an activcooler. To fix it on the motor only remove the prevent end shield with the shaft and replace it through that end shield with the fan.

bigger mounting-plate for the Orbit

For a stable fixing the motors of the series Orbit, we developed a bigger mounting-plate. To fix it on the motor only remove the prevent plate and replace it through that new mounting-plate.

Shaft with a back-plate for redesign the Orbit with a shaft on the back

For better adjust the Orbit in your model you can get a back-plate with a shaft to redisign the motor with a shaft on the back. You can use the redesigned motor e. g. in a motor-model with a firewall made for a gasmotor.