About us
Events
Expo
Success
News
Specialmotors
Orders
Manuals
Price
Accessories
AGB's
Imprint
Motors Example of use Datasheet Contact Home

News

12.01.10 "Copter 30/12" upgraded

We have upgreaded the Copter 30/12. The weight is reduced to about 470 gr. Also the rpm with no load is changed to about 470  1/min /V with no load. For a better fixintg we have also changed the hole pattern of the motor.

For more information klick the motor!

20.03.09

Big mounting plate with added ball bearing for the motor serial „Orbit"

The mounting plate includes a ball bearing on the shaft end of the motor. So the motor works with four ball bearings included. The motor can handle more power and harder flights. You can rebuild all motors of the serial „Orbit" and „Orbit Hei Expert" with this bigger mounting plate with the ball bearing or order a new motor comlete with the new plate.

 

15.03.09

The new catalog from Plettenberg is abailable. It is the 8. edition

 

10.03.09 At the fair in Sinsheim we presented the News 2009

for power boats we have 5 new motors 

 

for aerobatics a small revolution

for Helicopter the new Copter

 

for more information klick "News" 

 

10.03.08

New motor series DINATOR

 

Dinator is the name of a new solidly built Inrunner brushlessmotor series with high RPM performance. The motors are developed with a special designed Stator/Rotor metal sheet. It is the first time, that the Rotor is produced as a stack, made of single metal sheets. Because so the losses in the process of magnetising are minimized, the motor has a high effiency of a about 90% and low internal resistance as well as advantages in using the motor in partial load. The direct drive motor has a solid 8 mm Shaft. The geared motor is fitted out with a 6mm shaft. At the moment we have 3 motors in the Dinator family

 

Dinator 30/3 5:1 for Hotliner with about 6kg and 6S to 10S – 320 RPM/ V, weight about 425 g

Dinator 40/4 for Impeller Typ DS 75 with 10 S , 65A - 950 RPM /V, weight about 465 g

Dinator 50/3 for Impeller Typ DS 75 with 10 S, 83 A – 1020 RPM/V, weight about 550 g

 

 

29.01.08

Predator 25-8 is available now

The Predator 25 close the gap between the Terminator and the Predator 30 and is developed for F3A-X Models or models with the same wight, means aerobatic-models with a span of about 2,3 m – 2,5 m. In the class F3A-X is the limit of the weight 10 kg. The motor is developed light as possible, the motorwight is 1275 g incl. the couplesystem for the folding-props.

You have to use the motor with a LiPo 10S and 8-10Ah. The efficiency of the motor is about 89% and the power is about 7KW.

The Predator 25 is just available in a spinnersystem with foldingprops 25-28". The weight of the motor, controler, spinner, prop and lipo is about 4000 g. For the „normal" aerobatic the motor is good for models up to 12 kg.

 

29.11.07

New Kokam cells available

 

The new LiPo-cells from Kokam are available. We have add the new 5000mAh cell. So we have the Kokam 2400mAh / 3200mAh / 4000mAh and the new Kokam 5000mAh. The cells are good for up to 30C

 

cell Volt weight dimension
Kokam 2400, 3S-1P / -30C 11,1 V ca. 220 gr 10,7 x 3,4 x 3,1 cm
Kokam 2400, 4S-1P / -30C 14,8 V ca. 305 gr 10,7 x 3,4 x 4 cm
       
Kokam 3200, 3S-1P / -30C 11,1 V ca. 315 gr. 16 x 4,3 x 2,3 cm
Kokam 3200, 4S-1P / -30C 14,8 V ca. 390 gr. 15,5 x 4,3 x 3 cm
Kokam 3200, 5S-1P / -30C 18,5 V ca. 495 gr. 16 x 4,3 x 3,9 cm
       
Kokam 4000, 3S-1P / -30C 11,1 V ca. 370 gr. 15,5 x 4,3 x 3 cm
Kokam 4000, 4S-1P / -30C 14,8 V ca. 490 gr. 15,5 x 4,3 x 4 cm
Kokam 4000, 5S-1P / -30C 18,5 V ca. 595 gr. 16 x 4,3 x 5 cm
Kokam 4000, 6S-1P / -30C 22,2 V ca. 715 gr. 15,5 x 4,3 x 6 cm
 
Kokam 5000, 3S-1P / -30C 11,1 V ca. 455 gr. 16 x 4,3 x 3,6 cm
Kokam 5000, 4S-1P / -30C 14,8 V ca. 580 gr. 15,5 x 4,3 x 4,7 cm
Kokam 5000, 5S-1P / -30C 18,5 V ca. 730 gr. 16 x 4,3 x 5,9 cm
Kokam 5000, 6S-1P / -30C 22,2 V ca. 860 gr. 15,5 x 4,3 x 7 cm
 

 

20.09.07

Predator 25

 

The Predator 25 close the gap between the Terminator and the Predator 30 and is developed for F3A-X Models or models with the same wight, means aerobatic-models with a span of about 2,3 m – 2,5 m. In the class F3A-X is the limit of the weight 10 kg. The motor is developed light as possible, the motorwight is 1275 g incl. the couplesystem for the folding-props.

You have to use the motor with a LiPo 10S and 8-10Ah. The efficiency of the motor is about 89% and the power is about 7KW.

The Predator 25 is just available in a spinnersystem with foldingprops 25-28”. The weight of the motor, controler, spinner, prop and lipo is about 4000 g. For the “normal” aerobatic the motor is good for models up to 12 kg.

The Predator 25 is available from November 2007.

10.09.07

Orbit Heli Expert

By using more powerfull accus you need an adjust motorpower.

With our new Laser-Fine-Cutting-System it was no problem to modify the metal sheed for the windings of the Orbit-Heli-Expert. The motor gets a better efficiency, the rpm gets higher and the motor is about 10°C cooler if it is used in Heli-3D-flight.

The following Orbit Heli Expert are available:

Orbit 15-10 Heli Expert       173,00 €

Orbit 15-12 Heli Expert       173,00 €       

Orbit 25-08 Heli Expert       242,00 €

Orbit 30-12 Heli Expert       258,00 €

      

 

01.07.07

1st. place at the F5D Pylon World Cup in Liezen / Austria

At the F5D Pylon World Cup Daniel Mayr winns. He is the World Cup Champion the second time. With the HP 220/17/A1 S P6 he was the winner and Günther Mayr gets with the HP 220/20/A1 S P6 the second place.

      

Congratulations!

 

30.06.07 success in the  3rd ASAW in Altaussee

At the 3rd ASAW in Altaussee gets Achim Kurreck with the HPR06 a highspeed from 184 km/h. The used motors are 2 x HP 220BM/50/A1 S P4 with 2 x 16 cells.

In the class Power-Boat Hydro 3-4 LiPo get Johann Fischer with the Agitator from HM the first place. With the HP 220BM/30/A3 S P4 and 4S 5000 Flightpower accus the highspeed was 123,5 km/h.

In the class L10 Achim Kurreck get the first place. The hight speed in the class 10S was 135 km/h

Congratulations!

 

25.06.07

new 6 mm Power-Goldplugs from Plettenberg

The new 6 mm goldplug-system from Plettenberg are available.

 

20.06.07

„Predator 37/6“ available in a short time

The tall brother of the Predator 30/8 bribes with his incredible power. It is currently the first and single engine on the market, that brings with only 1900 g (incl. Propmounting for 3 for Threebladprop) a Power of 15 KW - completely unrivalled. With the Predator 37/6 in his Raven, Bernd Beschorner won the German Acromasters and moved the professional world into astonishment.

The engine has 3 ballbearings 20 poles and clearly more power than a gasengine of 150 ccm does.

 

 

03.06.07 big success at the international F5D contest in Herzebrock

A great second place get Daniel Mayr from Austria with HP 220/17/A1 S P6. Günther Mayr get the third place with the HP 220/20/A1 S P6.

Congratulations!

 

20.03.07

Orbit XL is ready for deliver

With the Orbit XL we close the gap between the Orbit and the Xtra Series.

The experiences from the evolution of the big outrunner Predator and Terminator are during the construction of the Orbit XL fully flowed in and so succeeded in designing an engine that corresponds to the modern orders through the use of cells LiPo optimally.

We developed a revolutionary integrated cooling system ICS in addition to the acting coolingfan. We combine long terms facilitates with high strength.

The triple ball beariang is natural. The engine has 10 poles. The Orbit 20XL settled in the class of 40-60 size and the Orbit 25XL in the class of 60-70 size motors.

 

         

 

20.02.07

The new catalog 2007/2008 from Plettenberg is abailable 

 

24.09.06 German Acro Masters Champion 2006

Bernd Beschorner winns with his "Raven" the German Acro Masters. He was the only pilot, starts with an electric powered motor. The motor is a Plettenberg "Predator 37/6".

Congratulations!

 

25.08.06

Germany is Worldchampion 2006 

Wolf Fickenscher, Guntmar Rüb und Heiko Greiner are Worldchampion, Vice-Champion and Third of  F5B Contest as well as Teamchampion in Pitesti / Romania!!

Congratulations!

 

10.03.06 The News 2006 are enlarged.

 

03.03.06 The News 2006 presented.

 

01.03.06 The Predator is ready for deliver.

 

01.03.06 The propdatas for the Terminator avaílable.

 

01.03.06 The propdatas for the Predator are enlarged.

 

06.12.05 The propdatas for the Predator available!

 

24.11.05 more options for the XTRA available!

 

 

Copyright © 2005 by Plettenberg Elektromotoren und Mey-IT.de