 |
|
||||||||||||||||||||||||||||
|
Copter 30
The new generation in the Helipower! In a revolutionary construction the engine combines the advantages of the Outrunnermotor with the advantages of the Inrunner. The main advantage lies in a new flow control system within the rotor. Through this flow control system the losses are in the partial burden company minimized. An assumption for efficient Helimotors! Through this system furthermore small air gaps and thus a higher torque are reached. Because of the invert of the SPS Windingsystem (typical for outrunners) also this advantage was integrated. The coolingfan inside optimize the cooling of the rotor and the winding. The Copter is an Inrunner with more than 90 % efficiency and a stroke of genius of the technique.
The motor is available with 6 mm shaft or with 8 mm shaft. Please tell us the shaft you need in your order. The inner fan is optimized for different rotation directions. Please tell us by order in what direction you want to use the motor as follows:
The
motor is also available wih a redesigned housing for using the motor in the Tree
Dee Rigid von Henseleit. The diameter is reduced to about 58 mm at the flats !
|
